How it works
Everything you need to know about getting a Power Flush
Assessing the system
Upon arrival we will survey and assess the system
Upon arrival we will survey and assess the system and prepare for the flush which is best done by connecting the powerflush machine and our filtration system to the return on the boiler or as close to it as possible.
The Power Flush
We will then start the powerflush and introduce our cleaning chemicals with all the system open and boiler running for around 30mins.
When we have circulation and heat we close all the radiators apart from one and concentrate on this, once we bring this radiator up to temperature we close and move on to the next radiator this allows the machine to concentrate on one radiator only.
Before the Power Flush
During the Flush & Filtration
The power flush consists of a chemical clean out of your boiler, pipes and radiators replacing the dirty sludge with clean water.
After the Power Flush
Removing the dirty water
We then flush the hot water boiler circuit then start removing all the dirty water and replacing it with clean water.
Duration is aprox 4-6 hrs for 12 radiators however this can take longer depending on severity of the build up. We then remove the Powerflush machine, reconnect the system and introduce inhibitor and test the system. There is a certificate supplied with warranty and all information required.
No mess involved
- The Power Flush is done from a single point which we protect.
- There is no need for radiators to be removed.
Customer Reviews
